Spray painting UPVC doors is an affordable and efficient way to give your home a new look without having to replace the entire door. However, the process can be quite tricky if you don’t know what you’re doing. In this article, we’ll show you how to spray paint your UPVC door in easy-to-follow steps.
Before you start, make sure you have all the necessary tools and materials, including:
- UPVC door cleaner
Sandpaper (220 grit)
Masking tape
Spray paint primer for UPVC
Spray paint in your chosen color
Respirator mask
Step 1: Clean the door
The first step in spray painting your UPVC door is to thoroughly clean it. Use a UPVC door cleaner to remove any dirt, grease, or grime that may be on the surface of the door. Make sure to follow the instructions on the cleaner and wear gloves to protect your hands. Allow the door to dry completely before proceeding to the next step. 
Step 2: Sand the door
After the door has dried, use sandpaper to lightly sand the surface of the door. This will create a rough surface that will allow the primer to adhere better. Use 220 grit sandpaper and make sure to sand in the direction of the grain.
Step 3: Mask off the areas you don’t want to paint
Using masking tape, cover any areas of the door that you do not want to paint, such as the glass or the door handle. You can also use plastic sheeting or newspaper to cover any surrounding areas to protect them from overspray.
Step 4: Apply the primer
Once you have masked off the areas you don’t want to paint, it’s time to apply the primer. Use a spray paint primer that is specifically designed for raw timber on kitchen doors. Hold the can approximately 10-12 inches away from the door and spray in a sweeping motion. Make sure to apply an even coat and avoid spraying too much in one spot to prevent drips.
Step 5: Allow the primer to dry
After applying the primer, allow it to dry completely. This can take anywhere from 30 minutes to an hour, depending on the weather conditions. Make sure to follow the instructions on the can and avoid touching the surface of the door while it dries.
Step 6: Apply the paint
Once the primer has dried, it’s time to apply the paint. Shake the spray paint can well before use and hold it approximately 10-12 inches away from the door. Apply the paint in a sweeping motion, making sure to apply an even coat. Allow the first coat to dry completely before applying a second coat. 
Step 7: Allow the paint to dry
After applying the final coat of paint, allow the door to dry completely. This can take anywhere from 24-48 hours, depending on the weather conditions. Make sure to follow the instructions on the can and avoid touching the surface of the door while it dries.
Step 8: Remove the masking tape and plastic sheeting
Once the paint has dried, carefully remove the masking tape and plastic sheeting. Make sure to do this slowly and gently to avoid pulling off any paint.
Step 9: Reattach the door handle and hardware
After removing the masking tape and plastic sheeting, reattach the door handle and any other hardware that you removed before painting.
In conclusion, spray painting a UPVC door can be a great way to give your home a new look without breaking the bank. By following these simple steps, you can achieve a professional-looking finish that will last for years to come. Remember to always wear protective gear, follow the instructions on the cans of paint and primer, and take your time to achieve the best.
